What Margins Do a Retailer and Distributor Need?
An independent retailer needs 35% to 50% margin, with convenience stores at the top of that range and grocery nearer the bottom. A DSD distributor needs 25% to 30%. Both have to come out of the same shelf price, which means your landed cost needs to sit near 20% to 25% of suggested retail for the math to work at all. Brands that fail in retail almost always did the arithmetic forward from their cost instead of backward from the shelf.
These are not negotiating positions. They are the operating economics of businesses that run trucks, pay drivers and rent shelf space, and a product that cannot clear them will be declined on arithmetic before anyone tries it.
The price ladder, top down

Work the ladder in this order, every time:
- Start with the shelf price. What will a shopper actually pay for this, next to the products already sitting beside it? Say $2.99.
- Subtract the retailer’s margin. At 38%, the store keeps $1.13 and pays $1.86.
- That $1.86 is the distributor’s selling price. Not a suggestion. It is what the distributor charges the store.
- Subtract the distributor’s margin. At 27%, the distributor keeps $0.50 and pays you $1.36.
- $1.36 is your wholesale price. It is the number you invoice, and everything you do has to fit underneath it.
- Subtract your landed cost. At $0.72, or 24% of retail, you keep $0.64 a unit before samples, displays and the next production run.
Run that same ladder with a landed cost of $1.20 and your gross margin is $0.16 a unit before any selling expense, which is not a business. Run it with a landed cost of $1.50 and you are underwater at wholesale. The product never gets a chance to be good.
Why you build the ladder downward
The instinct is to start at your cost, add a margin you would like, and call that the wholesale price. It produces a number that feels fair and has nothing to do with what a shopper will pay.
Retail is a fixed-price environment from the shopper’s side. There is a price at which a 2oz energy shot sells and a price at which it sits, and it is set by everything else on that counter, not by what your co-packer charged you. Once the shelf price is fixed, the retailer’s margin and the distributor’s margin are close to fixed too, because those are the numbers those businesses need to operate. Everything variable happens below that line, in your cost structure.
This is also why the margin gate is the first thing checked when a product is submitted. It is objective, it takes two minutes, and it is far cheaper to discover on paper than after a co-packer minimum has been paid. See how a product gets accepted.
Margin is not markup

Margin is (price minus cost) divided by price. Sell at $2.99 with a cost of $1.86 and the margin is $1.13 / $2.99 = 38%.
Markup is (price minus cost) divided by cost. The same two numbers give $1.13 / $1.86 = 61%.
Retailers and distributors speak in margin. Factories and many founders think in markup. Quote 38% when a buyer asked for 38% margin, using the markup formula, and you have just underpriced yourself by about fourteen cents a unit, on every unit, forever.
The fix is one line of discipline: write the word margin or markup next to every percentage on your price list. The retail margin calculator will run your numbers both ways, and margin vs markup in retail covers the conversions.
Margin targets by channel

Independent convenience: retailer 40% to 50%, distributor 25% to 30%. The highest retailer margins in retail, and they are earned. A c-store has very little space, high rent per square foot, long hours and heavy shrink. The margin is what pays for a shelf position an item has to keep earning.
Independent grocery: retailer 35% to 40%, distributor 25% to 30%. Lower margin, much larger basket and more shelf space. Multi-serve formats work here in a way they do not at a counter.
Specialty and natural: retailer 40% to 50%, distributor 25% to 35%. The store is paying for the ability to explain a product to a customer who wants it explained, and a specialty distributor often takes a wider margin for the same reason.
Regional chain: retailer 30% to 40%, distributor 20% to 28%. Lower headline margins, but promotional allowances sit on top and change the real number substantially.
National chain: retailer 30% to 35%, distributor 18% to 25%. Plus slotting, markdown money, chargebacks and EDI compliance costs. Chains look cheaper on the margin line and are usually more expensive in total.
Why each tier needs what it needs
The retailer
An independent store owner is buying a shelf position with your item. That position has a cost: the rent under it, the capital tied up in the inventory sitting on it, the labour to price and stock it, the shrink and theft, the credit card fees, and the item he did not stock instead. A 40% margin on a $2.99 item is $1.13, and against a facing that turns a few units a week, that is a modest business. It is not greed, it is a small-format retail P&L.
The distributor
A DSD distributor is buying the same item and then spending money to move it: the truck, the fuel, the driver, the warehouse it sits in between deliveries, the merchandising time at the shelf, the damaged and short-dated units, and the working capital tied up between paying you and being paid by the store. Twenty-seven percent covers all of it and leaves a margin. Below 25% the route does not pay for itself, which is why a distributor turns down products they personally like.
Three worked examples
| Line | $1.99 candy | $3.49 energy shot | $7.99 HBA item |
|---|---|---|---|
| Shelf price | $1.99 | $3.49 | $7.99 |
| Retailer margin | 42% | 40% | 45% |
| Distributor sells to store at | $1.15 | $2.09 | $4.39 |
| Distributor margin | 28% | 27% | 25% |
| Your wholesale price | $0.83 | $1.53 | $3.29 |
| Target landed cost (25% of SRP) | $0.50 | $0.87 | $2.00 |
| Your gross margin | $0.33 (40%) | $0.66 (43%) | $1.29 (39%) |
Notice what stays constant. Whatever the price point, a workable structure leaves the brand somewhere around 40% gross margin at wholesale, and that 40% is what has to fund samples, displays, point-of-sale material and the next production run.
The costs that quietly eat your margin
- Inbound freight and warehousing. Getting finished goods from the co-packer to your dock, and holding them until pickup. Outbound is the distributor’s cost, because orders are FOB origin.
- Samples. Several cases across distributors and buyers, and they are never returned.
- Point-of-sale material. Clings, shelf talkers and counter displays, per door.
- Unsaleables at the shelf. Damage in transit is the distributor’s claim against the carrier. Consistently high unsaleables in store is a packaging problem, not bad luck.
- Returns and allowances. None are expected from the brand unless you separately negotiate them in writing with a distributor. Do not offer them by default.
- Payment terms. Net 30 to the distributor means you are financing the inventory for a month after it ships.
The real cost of getting a product into retail works through all of these in the order they arrive.
What to do when the ladder does not clear
Raise the shelf price, if the category supports it. Check what comparable items actually sell for on the same counter, not what you would like yours to be worth.
Lower the landed cost. A larger production run, simpler packaging, a domestic co-packer to cut freight and duty, or a smaller fill size. This is usually where the answer is.
Change the format. A single-serve at $2.99 alongside a multi-pack at $12.99 gives you a route-truck item and a grocery item from the same production.
Change the channel. If the numbers only work at a $19 price point, this is a specialty, chain or direct-to-consumer product. That is a real answer, not a failure.
Do not shave the distributor. Offering 18% to a DSD distributor to make your own math work simply produces a decline, and it signals that you do not understand the channel.
Who actually sets the shelf price
You suggest it. The store owner sets it. In independent retail that is not a formality, and it has a real effect on your margin math.
Most owners price close to the suggested retail, because the SRP is where their own margin works and because a price that looks wrong next to comparable items does not sell. Some price above it, particularly in high-rent urban locations or in stores with very little competition nearby. A few price below to drive traffic. All three are legal and none of them are within your control.
What this means practically is that your ladder should be built on the price you expect the majority of stores to charge, not the highest price any store might charge. If your economics only work when the item rings at $3.99 and half the network prices it at $3.49, the product is under-margined at the wholesale level and you will discover it after the first reorder rather than before.
It also means a suggested retail that is obviously too high gets ignored. Owners have been pricing their own shelves for decades and they know what their customers pay. Setting an SRP twenty percent above the category rarely produces a higher price; it produces an item priced down to the category and a distributor margin that quietly disappeared.
Building a price list a distributor can act on
Most price lists that arrive with a submission cannot be acted on, because they answer the brand’s questions rather than the distributor’s. A usable one fits on a single page and contains the following.
- Every SKU with its UPC, so the distributor can set it up without emailing you
- Case pack and inner pack, plus case dimensions and weight
- Case cost and unit cost, stated separately rather than left to be divided
- Suggested retail, and the resulting margin at both tiers, each labelled as margin
- Freight terms. Orders are FOB origin, so state your shipping point, hours and pickup lead time
- Payment terms, and whether you offer an early-payment discount
- Minimum order, in cases, not in dollars
- Lead time from purchase order to shipment
- An effective date, so everyone knows which version they are working from
Volume tiers belong on the same page if you offer them. Publishing them, rather than negotiating case by case, keeps your pricing consistent across distributors in overlapping territories, and it removes the single most common cause of a relationship going bad in this channel: a distributor discovering that a competitor down the road bought the same item cheaper.
Leave promotional pricing off the initial list entirely. A new item does not need a deal to get taken; it needs margin and a case pack a driver can carry. Discounts offered before an item has proven it turns tend to become the permanent price, and they come straight out of the 40% you were counting on to fund the next production run.
Submit Your Product for Review
Skip the cold outreach. Mr. Checkout presents products to corporate chain buyers and also works a network of thousands of independent retailers that build real reorder proof. Tell us about your product below and a real person will read it.
Frequently asked questions
What margin does a convenience store need?
Generally 40% to 50% on impulse items. C-stores carry the highest retail margins in the industry because they have the least space and the highest cost per square foot.
What margin does a DSD distributor need?
25% to 30% in independent retail. Below 25% the route economics stop working once the truck, driver, warehouse and shrink are paid for.
Is the margin negotiable?
The shelf price and your cost are negotiable. The tier margins largely are not, because they are operating requirements rather than preferences. Squeezing a tier produces a decline, not a discount.
What should my landed cost be?
Aim for 20% to 25% of suggested retail on impulse items. Above 30% the ladder rarely clears once both tiers take their margin.
Do I have to give the same price to every distributor?
Consistency protects you. Different prices to different distributors in overlapping markets creates conflict quickly, and the distributor who finds out he paid more will stop buying. Volume tiers published on your price list are the clean way to handle scale.
How do chain margins compare?
Chain retail margins are lower, roughly 30% to 35%, but slotting, markdown money, chargebacks, promotional allowances and EDI compliance add costs that independents do not charge. Compare total cost to serve, not the margin line.
Who pays the freight?
The distributor. Orders are FOB origin, so the distributor arranges and pays the freight and title passes at pickup from your dock. State your shipping point, hours and pickup lead time on the price list so there is no ambiguity on the first order.
Does your price ladder clear? Let us check
Related reading: The real cost of getting a product into retail · Retail margin calculator · What products are a fit? · How does a product get accepted?
